MODULARE 92/50

MOVABLE MODULAR PARTITION WALL SYSTEM MADE WITH ALUMINIUM PROFILES

The movable partition wall system MODULARE 92/50 is a suitable solution for creating new office space arrangements and separating workstations, taking into consideration the changing needs of office premises. MODULARE has a modular design which makes it easy to install and if necessary re-arrange. The design, width and height of the movable partition walls will be specifically manufactured in accordance with the designer’s or customer’s requirements.

WALL SYSTEM MODULARE 50
The modules are made from 15×50 mm and 30×50 mm aluminium profiles. The modules are assembled (framework, panels, seals, etc.) at Wallenium’s production facility and on-site they are simply connected together using the “click” method without the use of screws. The walls of the MODULARE 50 system are always installed into openings and a special 52×30 mm U-profile will cover the perimeter.
The maximum dimensions of the modules are 1000×2700 mm.

WALL SYSTEM MODULARE 92
The modules are made from 15×92 mm and 30×92 mm aluminium profiles. The modules are assembled (framework, panels, seals, etc.) at Wallenium’s production facility and on-site they are simply connected together using strain bolts or by the “click” method without the use of screws. The wall system MODULARE 92 can be installed into openings or left open at the top. If left open, a connection bar is used at the top of the modules to stiffen the entire wall. In addition, a 30×2 mm aluminium trim will cover the perimeter.
The maximum dimensions of the module are 1200×3000 mm.

CORNER SOLUTION MODULARE 92
Right angles are fixed with a 50×50 mm or 92×92 mm profile (post). In the case of the MODULARE 92 system, a right angle can also be made without a post and the glass meets at the corner. This is done by cutting the tops and bottoms of the profiles at 45-degree angles and reinforced with a threaded rod which is covered by an aluminium pipe.

DOORS AND HARDWARE
Swinging doors and sliding doors are made from aluminium profiles with glass or various non see through materials.
As a special solution, full glass or MDF profile doors may be used in the walls.
It is possible to use any lock, handle, knob, hardware, etc., which are made for profile system doors.

SURFACE TREATMENT AND PANELS
The surface treatment of the MODULARE aluminium profiles are naturally anodized or painted according to the RAL catalogue.
To fill the modules, different types of glass, painted, veneered, varnished or fabric covered panels with a maximum thickness of up to 16 mm may be used.

INSTALLATION
The movable partition wall system MODULARE is installed in modules, which makes installation quick and easy. Between the modules a sound insulation is installed, according to the sound resistance requirements. Modules can be attached to ceilings, walls and floors, as necessary. Electric wiring can be installed inside the grooves of the profiles.

WARRANTY 2 years
(valid when partition walls are mounted by Wallenium)