TK

FULL-GLASS PARTITION WALL SYSTEM WITHOUT VERTICAL PROFILES

The TK FULL-GLASS partition wall system is a suitable solution for creating new office space arrangements and separating workplaces, taking into consideration the changing needs of office premises. TK walls are designed as glass modules. These glass walls allow for a maximum unrestricted view since there are only profiles at the top and bottom of the glass and sides if requested. There are no vertical profiles between the glass panels.

PROFILES
The glass is held from above by 30×39 mm aluminium clamp profiles that have side covers or by a 21×40 mm sealed U-profile. At the bottom the glass is normally supported by a 15×15 mm U-profile or a 35×100 mm rectangular profile.
The surface of the TK aluminium profiles is typically naturally anodized or they can be painted according to the RAL catalogue.
As a special solution it is possible to use painted or veneered MDF profiles.

GLASS
Depending on the requirements, 8-12mm tempered or laminated safety glass is used. Visible glass edges are polished and if necessary the joints between the glass walls are filled with silicone or fixed with a special tape meant for glass.

CORNER SOLUTION
Where modules meet at a corner, the top and bottom of the profiles are cut according to the specific angle. In the case of a right angle, the sheets of glass are fixed in a way that one sheet covers the other. For any other angle, the sheets of glass are fixed at that angle. The glass edges are always straight and never cut on an angle.

DOORS AND HARDWARE
Sliding doors are hung from Wallenium’s standard track system with a special 30×39 mm clamp that extends for the total length of the glass.
In the case of hinged doors, the hardware and handles from various manufacturers can be used.

SPECIAL SOLUTIONS
As a special solution, coated or veneered MDF profiles can be used as profiles.

Warranty : 2 years
(valid only when mounted by Wallenium Partition Walls)